- 2.4 GHz wireless trigger for most camera brands
- High-Speed Sync, TTL, and Freeze, Front and Rear Curtain Sync capable
- Continuous Capture up to 20 frames per second
- Adjustable 9 F-stop energy range in 0.1 and 1.0 increments
- FJ400 400Ws Strobe with AC/DC Battery
- FJ400 AC/DC Lithium Polymer Battery
-
FJ400 AC Power Adapter and CordDiffusion Dome
-
FJ400 5.5" Magnetic Reflector
-
FJ400 Magnetic Gel Set
- FJ-X3 M Universal Wireless Flash Trigger with Multi-Brand Camera Mount
-
2 x USB-C To USB-A Cables
- Switch Rapid Box Octa (Small)
- Westcott Switch Bowens Insert
-
Lite Traveler Backpack
-
Limited 1-Year Warranty
Description
Never Miss a Shot Again
The FJ400 is the first portable 400Ws AC/DC strobe with under a second recycle speed at full power that offers an impressive 480+ full-power flashes per charge. The lightweight FJ400 offers unrivaled performance with the most accurate color temperature throughout its entire 9-stop output range.
TTL, High Speed Sync, Freeze Sync, and More
With an intuitive menu system and LCD color display, the FJ400 features Manual and TTL Flash Modes, High Speed Sync (HSS) up to 1/8000s, Freeze Sync up to 1/19000s, Continuous Capture up to 20 fps, Mask Function, Delay Function, Automatic Memory Recall, Rear Curtain Sync, Canon RT flash compatibility, group and channel assignment, Group Exposure Compensation, and much more. This strobe is firmware upgradeable via the included USB-C cable.
Say Goodbye to Brand-Specific Triggers
The powerful FJ-X3 M Universal Wireless Trigger is equipped with multi-brand technology that pairs with most camera brands to trigger the FJ Wireless and Canon RT devices. This wireless remote offers revolutionary compatibility with many Canon, Nikon, Sony (with adapter), Fuji, Panasonic Lumix, and Olympus cameras. See the compatibility chart for more details.
Unrivaled Battery Performance
The removable lithium polymer battery provides both DC power for on-location freedom and AC trickle-charge performance when the state of charge is above 25%.
Consistent Color Temperature at Every Power Level
The FJ400 maintains a color temperature stability of 5500K (±150K) throughout its entire 9-stop output range, with flash increments of either 0.1 or 1.0 stops. It features a 20W 5600K LED modeling lamp with auto-adjust and independent output control.
Optimized for Light Modifiers
The extended flash tube provides optimal light output allowing for a wider, even spread for filling light modifiers. Equipped with a Bowens S-Type mounting system, the FJ400 is easy to pair with your favorite softbox. The FJ400 includes a Magnetic 5” Reflector, Magnetic CCT Gel Set (CTO, 1/2-CTO, Window Green, Diffusion, Gel Frame), and a Rapid Box Switch Bowens Insert that allows you to pair your strobe with any Rapid Box Switch light modifier. The built-in tilter bracket with a tension screw offers secure mounting and positioning of large umbrellas and modifiers.
Designed with Safety In Mind
The FJ400 strobe is equipped with onboard self-monitoring cooling fans and an automatic shutoff feature to ensure safe operation during use.
Quick and Compact Rapid Box Switch Softboxes
Constructed with solid aluminum umbrella-inspired framework, the design of the included Rapid Box Switch maximizes durability, minimizes weight, eliminates the need for separate support rods, and makes setup a breeze. Everything is simple, quick, and compact.
Store and Transport Your Strobe Kit with Ease
Equipped with a large, central storage compartment featuring removable dividers, the included backpack is ideal for traveling comfortably with your FJ400 gear. It features various zippered compartments for storing smaller accessories, a separate internal compartment with three padded sleeves for storing laptops and tablets, a convenient water bottle pouch, a tripod holder with retention straps and more.
| FJ400 Strobe | |
|---|---|
| Maximum Power | 400 Ws |
| Power Control | 9 Stops |
| Flash Duration | t.1: 1/800 to 1/19,000 Sec |
| Recycle Time | 0.5 to 0.9 Sec |
| Burst Rate | 20 fps |
| Color Temperature | 5600K +/- 200K |
| Flash Ready Indicator | None |
| Reflector | 5.5" / 139.7 mm 55° Changeable |
| Accessory Fitting Type | Bowens S Type |
| Type | LED |
| Color Temperature | 5600K |
| Sync Type | Cable, Optical, Radio |
| Built-In Wireless Receiver | Yes |
| Sync Speed | 1/8000 Sec (High-Speed) |
| Wireless Channels / Groups | 32 / 16 |
| Wireless Range | 985' / 300.2 m (Radio) |
| Interface | USB-C |
| Power Source | AC Adapter, Integrated Battery |
| AC Input Power | 100 to 240 VAC, 50 / 60 Hz |
| Current | 1.6 A (Operating) |
| Battery Chemistry | Lithium-Ion Polymer (LiPo) |
| Maximum Output Voltage | 16.8 VDC |
| Capacity (mAh) | 4400 mAh |
| Flashes Per Charge | 480 Flashes (Full Power) |
| Recharge Time | 2.5 Hours |
| Display | LCD |
| Mount | 5/8" / 16 mm Receptacle |
| Auto Dump | Yes |
| Fan Cooled | No |
| Operating Temperature | 14 to 104°F / -10 to 40°C |
| Dimensions (H x W x L) | 4.3 x 4.8 x 11.5" / 109.2 x 121.9 x 292.1 mm |
| Weight | 5.4 lb / 2.4 kg |
| FJ-X3 M Universal Wireless Trigger | |
|---|---|
| Compatible Strobe | FJ400, FJ200, FJ80, FJ80 II, FJ-XR, Canon RT |
| Compatible Systems | Canon, Fujifilm, Nikon, Olympus, Panasonic, Sony (with adapter) |
| Radio Frequency | 2.4GHz |
| Wireless Channels | 32 (AU, 1-31) |
| Wireless Groups | 6 Native, 10 App |
| Wireless Range | 985' (300m) |
| Canon ID | 100 keys (00-99, RT only) |
| Control Modes | TTL (Auto), Manual |
| TTL EV Range | ± 3 |
| Sync Modes | High Speed (HSS 1/8000), Front Curtain, Rear Curtain |
| Standard Flash Sync | Camera Model Max Sync Speed |
| Ports | USB Type-C, 2.5mm (Flash) |
| Mobile App | Yes |
| Bluetooth | Yes |
| Firmware Update | PC, Mac |
| Battery | Built-in Rechargeable Lithium-Ion |
| Camera Compatibility | |
|---|---|
| Canon | EOS-1D X, EOS-1D X Mark II, EOS-1D X Mark III, EOS 5D Mark III, EOS 5D Mark IV, EOS 5, EOS 5DS R, EOS 6D*, EOS 6D Mark II, EOS 7D Mark II*, EOS 80D, EOS R, EOS R5, EOS R6, EOS RP EOS R3**, EOS Ra**, EOS M50**, EOS 90D**, EOS Rebel T8i**, EOS Rebel SL3**, EOS Rebel T7** |
| Fuji | XT-2, XT-3, XT-4*, GFX100†**, GFX100S†**, GFX50S†**, GFX50R†**, X-H1**, X-Pro3**, X-Pro2**, X-S10**, X-T30**, X-T20**, X-T200**, X-T100**, X-E4**, X-E3**, X-A7**, X-A5** |
| Nikon | D500, D750, D800*, D810, D850, Z6, Z7, Z50 D6**, D780**, D610**, D7500**, D5600**, D3500**, Zfc**, Z7 II**, Z6 II**, Z5**, Z9** |
| Olympus | OM-D E-M1 MARK II, OM-D E-M5 MARK II OM-D E-M1X**, OM-D E-M1 MARK III**, OM-D E-M5 MARK III**, OM-D E-M10 MARK IV**, OM-D E-M10 MARK IIIS**, OM-D E-M10 MARK III** |
| Panasonic Lumix | GH5, S1, S1r GH5s**, S1H**, S5**, GH5M2**, G95**, G9**, G85** |
| Sony (with Adapter) | a7, a7 III, a7R II, a7R III, a7R IV, a9, a9 II, a99 II, a6500 a7II**, a1**, a7S III**, a7C** |
| *Compatible camera with minor HSS, TTL, and/or performance limitations that can often be offset with adjustments within the camera and/or FJ Wireless equipment settings. | |
| **Manual compatibility only | |
| †Due to mechanical considerations, the trigger should not be mounted directly to the Fuji GFX50, GFX50R, GFX50S, GFX100 or GFX100S camera hot shoes. The trigger should only be mounted to the EVF Tilting Adapter EVF-TL1 Electronic Viewfinder accessory. | |